區碼變更


若需英語支援,請於 Discord 上的 Nintendo Homebrew 伺服器發問。
如果您喜歡本教學,我們很樂意接受捐贈

必讀事項

This is an add-on section for region changing your console. 這是透過安裝所選區域的 11.15.0 CTRTransfer 鏡像檔達成的。 After installing the image, you can update your console normally to the latest firmware (11.17.0).

請注意,區碼變更通常是不需要的,因為 Luma3DS 本身就支援跨區遊玩及程式語碼模擬的功能。 另外,您也可透過TWiLight Menu++來運行非支援語系的 NDS 遊戲。 You should only perform a region change if you wish to have your system UI is in a language that is not available on your console’s current region.

This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.

As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.

If you change the region of your console:

  • You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
  • You may not be able to access the eShop, even if you delete your eShop account beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
    • This is still relevant because, while purchases can no longer be made on eShop, game updates are still being provided. Updates are usually required for online play.
    • This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
    • Pokémon Bank also requires working eShop access.
    • That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
  • You will not be able to uninstall custom firmware without bricking the console! If you intend to uninstall custom firmware in the future, you MUST restore your NAND backup that was created before the region change.

必備項目

To download the CTRTransfer images on this page, you will need a torrent client like qBittorrent or Deluge.

操作說明

第一節 — 準備工作

  1. Power off your console
  2. 將 SD 卡插入至電腦中
  3. 在 SD 卡的根目錄底下建立一個新資料夾 3ds
  4. 解壓 GodMode9 .zip 中的 GodMode9.firm 檔案到 SD 卡的 /luma/payloads/ 資料夾中
  5. 解壓 GodMode9 .zip 中的 gm9 資料夾到 SD 卡的根目錄底下
  6. 從剛下載的 CTRTransfer .zip 中,解壓 11.15.0 CTRTransfer 鏡像檔 .bin 檔案至 SD 卡上的 /gm9/ 資料夾
  7. FBI.3dsx 複製到 SD 卡中的 /3ds/ 資料夾底下
  8. Copy faketik.3dsx to the /3ds/ folder on your SD card
  9. Reinsert your SD card into your console

第二節 — 備份 NAND

  1. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
  2. 按『Home』鍵以叫出主選單
  3. 選擇『Scripts…』
  4. 選擇『GM9Megascript』
  5. 選擇『Backup Options』
  6. 選擇『SysNAND Backup』
  7. 按 『A』 確認
  8. 按『A』 繼續
  9. 按『B』回到主選單
  10. 選擇『Exit』
  11. 如提示時,按下『A』取消檔案寫入鎖定
  12. Navigate to [S:] SYSNAND VIRTUAL
  13. Press (A) on essential.exefs to select it
  14. 選擇『Copy to 0:/gm9/out』
    • If you see “Destination already exists”, press (A) on “Overwrite file(s)”
  15. 按『A』 繼續
  16. Hold (R) and press (Start) at the same time to power off your console
  17. 將 SD 卡插入至電腦中
  18. Copy <date>_<serialnumber>_sysnand_##.bin, <date>_<serialnumber>_sysnand_##.bin.sha, and essential.exefs from the /gm9/out/ folder on your SD card to a safe location on your computer
    • Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
    • 這些備份檔案可於未來您磚機時用來修復系統檔案
  19. Delete <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha from the /gm9/out/ folder on your SD card after copying it
    • The other backup files are negligible in size and may be kept on your SD card for ease of access
  20. Reinsert your SD card into your console

第三節 — 進行 CTRTransfer

  1. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
  2. 當提示重要檔案備份時,按下『A』繼續,並在完畢後按下『A』繼續
  3. 當提示修正 RTC 日期及時間時,按『A』繼續並設定日期及時間,再按『A』繼續
    • 請注意,若您被提示說要修正 RTC 日期及時間,這表示您得在遵循完下列步驟後進入您的系統設定重新設定時間
  4. 移動至 [0:] SDCARD -> gm9
  5. 選擇 CTRTransfer .bin,並按『A』選擇
  6. 選擇『CTRNAND options…』
  7. 選擇『Transfer image to CTRNAND』
  8. 如提示時,請選擇『Transfer to SysNAND』
    • 當您有 EmuNAND 時,才會出現此提示
  9. 按『A』解鎖 SysNAND(lvl1)的寫入保護,然後按下提示的按鍵組合
    • 此過程將花費一些時間
  10. 轉移完畢後,按下『A』繼續
  11. 如提示時,按下『B』取消檔案寫入鎖定
  12. 按『B』兩次回到主選單
  13. 按『Home』鍵以叫出主選單
  14. 選擇『Scripts…』
  15. 選擇『GM9Megascript』
  16. 選擇『Scripts from Plailect’s Guide』
  17. 選擇『CTRTransfer Ticket Copy』
  18. 如提示時,按下『A』繼續
  19. 按『A』 繼續
  20. 按『B』回到主選單
  21. 選擇『Exit』
  22. 如提示時,按下『A』取消檔案寫入鎖定
  23. Press (Start) to reboot your console
  24. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • 在安裝 B9S + Luma 後,進行系統更新是很安全的
    • 如果過程中出現錯誤,試試到 DNS 設定底下將設定改成『自動 (auto)』

第四節 — 啟動 FBI 管理器

  1. 啟動『下載通信(Download Play)』程式 ()
  2. 等到你看到 Nintendo 3DSNintendo DS 按鈕
  3. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單
  4. 選擇『Miscellaneous options』
  5. 選擇『Switch the hb. title to the current app.』
  6. 按『B』繼續
  7. 按『B』回到 Rosalina 主選單
  8. 按『B』退出 Rosalina 選單
  9. Press (Home) to suspend Download Play
  10. Press the “Close” button on the bottom screen to close Download Play
  11. Re-launch the Download Play application
  12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card

第五節 — 重新安裝 Tickets

如果腳本說沒有找到任何使用者 tickets 且請您跳過本節,那麼您可跳過這一節.

  1. 於 Homebrew 清單內啟動 FBI 管理器
  2. 選擇「SD」
  3. 選擇『gm9』
  4. 選擇『out』
  5. 選擇『ctrtransfer_tickets』
  6. eshopunknown 資料夾或兩者都執行以下過程
    • 移動至資料夾
    • 選擇『<current directory>』
    • 選擇『Install and delete all tickets』(安裝並刪除所有 tickets 檔案)
    • 稍等一下。 系統可能會卡住一段時間,等就對了。
    • 按『A』確認
    • 按『B』以取消 CDN tickets 的安裝
  7. 按下『Home』鍵退出 FBI 管理器
  8. Re-open the Homebrew Launcher, either through the Homebrew Launcher icon on the HOME Menu or by re-following Section III of this page
  9. Launch faketik from the list of homebrew
  10. Once faketik has finished processing, press (Start) to exit faketik

This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.

  1. Power off your console
  2. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
  3. 移動至 [0:] SDCARD -> gm9
  4. 選擇 CTRTransfer .bin 鏡像檔,並按『X』刪除
  5. 按 『A』 確認
  6. Press (B) a few times to go back to the main menu
  7. Navigate to [1:] SYSNAND CTRNAND -> data -> <ID0> -> sysdata
    • The <ID0> will be a folder with a 32-character long name
  8. Use the D-Pad to highlight 00010017
  9. Press (Right Shoulder) + (A) to bring up the folder options
  10. 選擇『Copy to 0:/gm9/out』
  11. 按『A』 繼續
  12. While still highlighting 00010017, press (X) to delete it
  13. 按 『A』 確認
  14. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
  15. Once the file has been deleted, press (A) to continue
  16. 如提示時,按下『A』取消檔案寫入鎖定
  17. Press (Start) to reboot your console
  18. Your console will load into the initial setup menu
    • This is expected behaviour. You have not lost any of your game data
  19. Complete the initial setup menu by following the prompts on your console’s screen

Your 3DS has successfully been region changed!