Flashing ntrboot (3DS Multi System)

Pentru suport în engleză, cereți ajutor la Nintendo Homebrew pe Discord.
Dacă apreciați acest ghid, eu accept donații prin Paypal sau Bitcoin.

Before proceeding, ensure you have read all of the information on ntrboot

This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS’s version. See the flashcart table on ntrboot for more information.

Note that in some rare circumstances, it may be possible for the flashing process to brick a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as NDS Card)

Ce aveți nevoie

  • Your ntrboot compatible flashcart
  • Two 3DS family devices
    • The source 3DS: the 3DS family device that is already running boot9strap
    • The target 3DS: the device on stock firmware
  • The latest release of boot9strap (ntr boot9strap; not the devkit file)
  • The latest release of ntrboot_flasher


Secțiunea I - Preparații

  1. Închideți 3DS-ul sursă
  2. Introduceți cardul SD al 3DS-ului sursă în calculator
  3. Create a folder named ntrboot on the root of your SD card
  4. Copy boot9strap_ntr.firm and boot9strap_ntr.firm.sha from the boot9strap ntr .zip to the /ntrboot/ folder on your SD card
  5. Copy ntrboot_flasher.firm to the /luma/payloads/ folder on the source 3DS’s SD card
  6. Reinsert the source 3DS’s SD card back into the source 3DS
  7. Insert your ntrboot compatible DS / DSi flashcart into the source 3DS

Section II - Flashing ntrboot

  1. Launch the Luma3DS chainloader by holding (Start) during boot on the source 3DS
  2. Selectaţi “ntrboot_flasher”
  3. Read the red screen warning
  4. Apăsați (A) pentru a continua
  5. Select your flashcart
    • If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option
  6. Selectaţi “Dump Flash”
  7. Așteptați până când procesul este terminat
  8. Apăsați (A) pentru a continua
  9. Press (A) to return to the main menu
  10. Select “Inject Ntrboot”
  11. Press (A) for retail unit ntrboot
  12. Așteptați până când procesul este terminat
  13. Press (A) to return to the main menu
  14. Press (B) to power off the source 3DS

Continue to Installing boot9strap (ntrboot)