Finalisation de l’installation


Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew.
Si vous appréciez ce guide, nous acceptons les Dons.

Lecture requise

Le fichier boot.firm est exécuté par boot9strap lui-même, après avoir terminé le chargement de la NAND. In this case, we are using Luma3DS by LumaTeam to patch the console, allowing it to run homebrew software.

On this page, we will make critical system file backups and install some homebrew programs. Most of these steps will be automated using a script that you will run on your console.

The script will install the following applications:

  • FBI (installs CIA formatted applications)
  • Homebrew Launcher Loader (launches the Homebrew Launcher)
  • Anemone3DS (installs custom themes)
  • Checkpoint (backs up and restores save files for 3DS and DS games)
  • ftpd (access your 3DS SD card wirelessly)
  • Universal-Updater (a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)
  • GodMode9 (multipurpose tool which can do NAND and cartridge functions)

If you don’t want one of these applications, you can remove them after you have finished this page by navigating to System Settings -> Data Management -> Nintendo 3DS -> Software. (GodMode9 cannot be removed in this way and is generally required for other functions.)

Notes de compatibilité

Si votre New 3DS était en version 2.1.0 avant de suivre les instructions ce guide, vous devriez restaurer votre sauvegarde NAND avant de continuer. Cela ne s’applique probablement pas à vous à moins que vous ne suiviez ce guide en 2017.

Si votre configuration CFW précédente était basée sur EmuNAND et que vous souhaitez déplacer le contenu de votre EmuNAND/RedNAND vers SysNAND, suivez Transférer votre EmuNAND avant de suivre cette page. Si vous ne savez pas ce qu’est une EmuNAND, cela ne s’applique pas à vous.

Ce dont vous avez besoin

Instructions

Section I - Préparatifs

Dans cette section, vous copierez les fichiers nécessaires pour suivre le reste des instructions de cette page.

  1. Éteignez votre console
  2. Insérez votre carte SD dans votre ordinateur
  3. Copy finalize.romfs to the root of your SD card
  4. Open the luma folder on your SD card and create a folder named payloads inside, if it does not already exist
  5. Copy finalize_helper.firm to the payloads folder
  6. Réinsérez votre carte SD dans votre console

The screenshot below indicates the minimum SD card layout that is required to follow this page. Il est possible que vous ayez des fichiers ou des dossiers supplémentaires sur votre carte SD, selon votre configuration précédente ou la méthode que vous avez suivie.

Section II - Updating the System

Dans cette section, vous allez mettre à jour votre console vers la dernière version, ce qui est sans danger avec le custom firmware.

  1. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger
    • La console peut afficher un message disant “Aucune mise à jour nécessaire” au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
    • Si vous obtenez une erreur, réglez vos paramètres DNS et proxy sur « Automatique »
    • Si cela vous donne toujours une erreur, suivez ce guide de dépannage

Section III - RTC and DSP setup

Dans cette section, vous synchroniserez l’horloge interne de votre 3DS avec l’heure réelle et allez dumper le firmware du son (ce qui est nécessaire pour que certains logiciels homebrew utilisent correctement le son).

  1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
    • If one of these buttons is broken, download config.ini and put it in your luma folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
  2. Sélectionnez “Miscellaneous options”
  3. Sélectionnez “Dump DSP firmware”
  4. Appuyez sur (B) pour continuer
  5. Sélectionnez “Nullify user time offset”
  6. Appuyez sur (B) pour continuer
  7. Appuyez sur (B) pour revenir au menu principal de Rosalina
  8. Appuyez sur (B) pour quitter le menu Rosalina

Section IV - Setup Script

In this section, you will use a series of scripts to automate homebrew installation, SD card cleanup, and system file backup.

  1. Éteignez votre console
  2. Press and hold (Start), and while holding (Start), power on your console. This will launch the Finalizing Setup Helper
    • If you boot to the Luma3DS configuration menu, you held SELECT instead of START
    • If you boot to the HOME Menu, your payloads folder may be incorrectly spelled or in the wrong location
    • If you see a “Luma3DS Chainloader” menu, use the D-Pad and (A) buttons to navigate to and select finalize_helper from the list
    • If you encounter an error, consult the troubleshooting page
  3. If the Helper was successful, your console will boot into GodMode9
    • From this point forward, you can access GodMode9 by holding START while powering on your console
  4. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois terminé
  5. Si vous êtes invité à régler la date et l’heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l’heure, puis appuyez sur (A) pour continuer
  6. Appuyez sur (HOME) pour faire apparaître le menu d’actions
  7. Sélectionnez “Scripts”
  8. Select “finalize”
  9. Follow the prompts in the script, answering any questions that you are asked
    • If you encounter an error, follow the instructions in the error message or consult the troubleshooting page
  10. Once the script says “Setup complete!”, press (A) to power off the device
    • If you do NOT see the message “Setup complete!”, the script was not successful and you will need to redo this section from Step 3
  11. Insérez votre carte SD dans votre ordinateur
  12. Copy the /gm9/backups/ folder to a safe location on your computer
    • This folder contains critical file backups and should be backed up to multiple locations (i.e. cloud storage) if possible
    • The two SysNAND files are your NAND backup and can be used to revert your console to a working state if it is bricked by a software issue
    • The essential.exefs file contains your console’s system-unique files and can be used to recover your data in the event of a hardware failure
  13. If you still have them, delete the two SysNAND files from the /gm9/backups/ folder from your SD card
    • The essential.exefs file is small and may be kept on your SD card for ease of access

Vous avez terminé! Custom firmware is now fully configured on your console.

Trying to figure out what to do with your newly modded device? Visit our wiki!

As you may already know, Nintendo is shutting down Nintendo Network services for the Nintendo 3DS and Wii U on April 8th, 2024. This means that online play servers and SpotPass content (e.g. in StreetPass Mii Plaza, Super Mario Maker, and the Pokémon games) will be rendered inaccessible after this date.

The revival service Pretendo is aiming to provide these services after Nintendo shuts down the official one. However, their efforts require the collection of data from Nintendo Network servers in order to understand how they work, which can only be accomplished before the network shutdown.

If you would like to assist with this effort, you can contribute dumps of network data while the official servers are still online.

  • For information about preserving SpotPass data (data routed through Nintendo’s SpotPass feature), see the SpotPass Archive project. This project is not affiliated with Pretendo, but provides a more user-friendly instruction and submission format. SpotPass dumps do not contain any sensitive information.
  • For information about preserving game and HTTP packets (data used by games for servers and other features), see Pretendo’s Network Dumps page. Please note that this data may contain sensitive information, and that retrieving this data is more technically challenging.

Informations et notes

Voici quelques combinaisons de touches que vous devriez connaître :

  • Holding (Select) on boot will launch the Luma3DS configuration menu.
  • Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in /luma/payloads/, the Luma3DS chainloader.
  • By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. Cela peut être modifié à partir du menu Rosalina.
  • Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. Pour une liste de ces combinaisons, lisez le changelog.

Pour plus d’informations sur l’utilisation des différentes fonctionnalités de GodMode9, consultez les pages Utilisation de GodMode9 et Dumper des titres et des cartes de jeu.